Top 10 Compressed Air "Rules of Thumb"
Posted: Wednesday, October 14, 2009
by Tommy McGuire
McGuire Air Compresssors, Inc.
Here are our TOP TEN Compressed Air "Rules of Thumb" that we've come up with throughout our 25-plus years of experience. These are the areas of interest that our air compressor customers seem to ask about most.
1. CFM delivery per Horse Power at 100 PSIG:
For "home owner" type of air compressors---2 to 2.5 CFM per HP
For Small Vane & Screw air compressors (25 HP or less) 4 CFM per HP
For large Piston, Screw & Centrifugal air compressors--4.5 to 5 CFM per HP
NOTE: THE MORE CFM PER HP - THE LESS ENERGY USED.
2. Air Receiver Size needed for these types of inlet control:
Modulating Control---------------0 to 1 gallon per CFM
On-Line/Off-Line-----------------3 to 4 gallons per CFM
Stop-Start/ Variable Speed-------4 to 6 gallons per CFM
NOTE: THE MORE AIR STORAGE - THE LESS ENERGY USED
3. Amperage per Horse Power:
115 Volts------- 1 phase-------- 10 amps per horse power
230 Volts------- 1 phase-------- 5 amps per horse power
208 Volts------- 3 phase-------- 3 amps per horse power
230 Volts------- 3 phase-------- 2.5 amps per horse power
460 Volts------- 3 phase-------- 1.25 amps per horse power
574 Volts------- 3 phase-------- 1 amp per horse power
NOTE: THE MORE ENERGY EFFICIENT THE MOTOR - THE LESS ENERGY IS USED.
4. Air Piping Size by CFM and Pressure Drop:
Compressor Room Header---0.25 PSIG pressure drop per 100 feet of piping
Main Line-----------------0.5 PSIG pressure drop per 100 feet of piping
Loop Line-----------------1 PSIG pressure drop per 100 feet of piping
Branch Line---------------2 PSIG pressure drop per 100 feet of piping
NOTE: THE LESS AIR PRESSURE DROP - THE LESS ENERGY USED
5. Size Compressed Air Line Filters to be twice (2x) your compressor CFM flow rate.
This will lower your pressure drop 2-3 PSIG and save an additional 1% on electrical energy costs.
Elements will last twice (2x) as long and this can save on your maintenance costs.
6. Lowering Compressor Pressure settings 2 PSIG will result in a 1% energy savings.
7. Lowering Compressor Inlet Air Temperature 10 F will result in a 2% energy savings.
8. The average energy cost to operate an air compressor is approximately $0.10 per horse power per hour.
9. Compressed Air system leaks totaling the size of a 1/4" orifice, at 100 PSIG, running 24 hours a day will waste approximately $15,000 worth of electrical energy a year.
10. Using Synthetic Compressor Lubricants can save you up to 9% of the energy cost of operating your compressor as compared to using a non-synthetic lubricant.
DEFINITIONS:
CFM= Cubic Feet per Minute - Volumetric air flow rate.
Inlet Pressure = The actual pressure at the inlet flange of the compressor.
PSIG= Pounds Per Square Inch Gauge
AMPS=Abbreviation of the plural for Ampere, a unit of electrical current
Tommy McGuire
"Real People with Real Air Compressor Experience"
Owner of McGuire Air Compressors
1-888-229-9999
Email: compressors@mcguire.biz
Offering you Quality Industrial Equipment at a Savings...
www.industrialaircompressors.biz Champion Industrial Air Compressors, pumps, oil & manuals
www.airdryers.biz Deltech Refrigerated Compressed Air Dryers to remove harmful moisture from your compressed air system
www.hosereels.biz For Reelcraft Industrial Hose Reels for efficiency and safety
This Article has been viewed 545 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.